(former Gemplus)
GemPC Twin
The GemPC Twin is a low cost USB and RS232 universal smartcard reader, associates all characteristics necessary in a desktop environment and all the features of a transparent smartcard reader/writer. The GemPC Twin is the perfect solution for logical access control, home banking, loyalty programs, electronic personalization of smartcards, ...
Features 
- ISO7816 smartcard reader/writer (T=0, T=1)
- Programmable from 9,600 bauds to 115,200 bauds with the smart card
- Supports 3V and 5V cards
- Up to 100,000 insertion cycles
- USB (CCID) interface
- RS232 interface
- Smartcard communication programmable from 9600 bauds to 115200 bauds
- High Speed communication with the PC through USB port connection
- Powered by the USB port or PS2 port
- PC/SC drivers (Win98, WinME, NT4, Win2000, XP, Win2003)
Accessories for GemPC Twin
- RS232 cable
- Vertical stand
- 3.5" floppy disk drive like case
GemPC USB
The GemPC USB low cost universal smartcard reader, associates all characteristics necessary in a desktop environment and all the features of a transparent smartcard reader/writer. The GemPC USB is the perfect solution for logical access control, home banking, loyalty programs, electronic personalization of smartcards, ...
Features 
- ISO7816 smartcard reader/writer (T=0, T=1)
- Up to 100,000 insertion cycles
- Supports 3V and 5V cards
- USB (CCID) interface
- High Speed communication with the PC through USB port connection
- Powered by the USB port
- PC/SC drivers (Win98 OSR2, WinME, Win2000, XP, Win 2003, Linux, Mac OS X)
GemPC Serial
The GemPC Serial low cost universal smartcard reader, associates all characteristics necessary in a desktop environment and all the features of a transparent smartcard reader/writer. The GemPC Serial is the perfect solution for logical access control, home banking, loyalty programs, electronic personalization of smartcards, ...
Features 
- ISO7816 smartcard reader/writer (T=0, T=1)
- Up to 100,000 insertion cycles
- RS232 serial interface
- Smartcard communication programmable from 9600 bauds to 115200 bauds
- Host communication programmable up to 38800 bauds
- Powered by the keyboard port
- PC/SC drivers (Win9x, WinME, WinNT4, Win2000, XP, Win2003, Linux)
GemPC Key
is a new, cost-effective reader for PC logon applications and GSM card management.
Features 
- ISO7816 smartcard reader/writer (T=0, T=1)
- support all ISO7816 TA1 parameters (up to 344 Kbds)
- Supports 1.8V, 3V and 5V cards
- USB type A connector garanteed for 1500 insertions
- USB (CCID) interface
- USB 2.0 full speed communication with the PC through USB port connection
- Powered by the USB port
- PC/SC drivers (Win98, WinME, Win2000, XP)
GemPC Card
PCMCIA-format type II smartcard reader/writer. It can handle a wide range of functions for various applications such as computer security, Internet access, health care, banking and telecom.
Features 
- ISO7816 smartcard reader/writer (T=0, T=1 with 1.8, 3 and 5V)
- Memory cards support using "Memory Card API for GemCore Twin Pro"
- ISO smartcard acceptor with up to 100,000 insertion cycles
- PC Card interface (PCMCIA type II)
- PC/SC drivers (Win9x, WinME, WinNT4, Win2000, XP, Win2003, Linux)
GemPC Express
GemPC Express compact smart card reader/writer, designed to plug into a standard PCMCIA ExpressCard 54 PC slot, is the ultimate smart card peripheral for laptop PC and mobile users. It is very simple to use and install.
Features 
- ISO7816 smartcard reader/writer Class A,B and C (1.8, 3 and 5V)
- Reads from and writes to all ISO 7816-1,2,3,4 microprocessor cards, T=0 and T=1
- Memory cards support using "Memory Card API for GemCore Twin Pro"
- Short circuit detection
- ISO smartcard acceptor with up to 100,000 insertion cycles
- EMV level 1 mechanically compliant
- Embossed smart cards supported
- PCMCIA ExpressCard/54 interface (USB2)
- PC/SC drivers (Win2000, XP, Win2003, Linux)
GemPC Pinpad
GemPC Pinpad is a new class 2 reader featuring a keypad and display, adding Secure PIN Entry (SPE) functionality to the Gemplus PC-Link readers range.
Security and confidentiality
GemPC Pinpad provides a highly secure way to enhance your smart card-based application, by protecting the smart card PIN code from unauthorized access. The PIN code is entered locally and safely on the reader, and is thus never transmitted to the PC. This is especially relevant for corporate security, Internet commerce and online banking services, where strong security and confidentiality is a must.
Easy of use
GemPC Pinpad comes with a large 2 lines and 16 characters display, to guide and help the user with PIN entry and change operations. User interface is available in several languages and new ones can be easily programmed.
Integration and maintenance is simplified by re-using GemPC?s drivers and GemCore Pro firmware, already implemented in GemPC readers and partner keyboards
Features 
- ISO7816 smartcard reader/writer Class A,B and C (1.8, 3 and 5V)
- Reads from and writes to all ISO 7816-1,2,3,4 microprocessor cards, T=0 and T=1
- Memory cards support using "Memory Card API for GemCore Twin Pro"
- Short circuit detection
- ISO smartcard acceptor with up to 100,000 insertion cycles
- EMV level 1 mechanically compliant
- Embossed smart cards supported
- USB 2.0 interface
- PC/SC drivers (98, 98SE, Me, 2000, XP, Server 2003, XP Pro x64, Linux)
Human interface
- 2x16 alphanumeric display
- 2 LEDs: green for transparent mode, orange for Secure PIN Entry
- Tactile keypads with 16 (4x4) silicon rubber keys
GemPocket
One-Time Password and challenge–response functions
Gemalto Pocket reader is a handheld device designed to secure authentication of cardholders for remote banking, e-commerce or network access control applications.
The reader’s main role is to prevent the user to type his/her PIN on the workstation keyboard,which is considered a vulnerable environment.
After having inserted its smart card, the Gemalto Pocket reader user is invited to enter his/her PIN code. Then the reader formats and displays the One-Time Password (OTP) computed by the card. The OTP is a unique and non-reusable numeric password that allows the remote server to authenticate both the smart card and its owner. This two-factor authentication is a strong
alternative to static password schemes or token devices currently used today.
To secure important transactions, Gemalto Pocket reader also displays digital signatures according to the challenge-response
mechanism.
A standard generic device
The Gemalto Pocket reader family is compliant with the standard industry specifications: EMV,MasterCard/ Visa Chip uthentication Program (CAP) and therefore accepts the most common banking cards in the market. Since the smart card handles both the personal data of its owner and the cryptographic algorithms, the reader is the same for all users and cost effective. It does not require any personalization.
GemPC410 (Not in production, available in small qtys)
The GemPC410 low cost universal smartcard reader, associates all characteristics necessary in a desktop environment and all the features of a transparent smartcard reader/writer. The GemPC410 is the perfect solution for logical access control, home banking, loyalty programs, electronic personalization of smartcards, ...
Features
- ISO7816 smartcard reader/writer (T=0, T=1 and synchronous memory cards with 5Vpp)
- Up to 100,000 insertion cycles
- RS232 serial interface
- Smartcard communication programmable from 9600 bauds to 115200 bauds
- Host communication programmable up to 38800 bauds
- Powered by the keyboard port
- Approved by MONDEX
- PC/SC drivers (Win9x, WinME, WinNT4, Win2000, XP)
GemPC410-FD(Not in production, available in small qtys)
PC integrated smartcard reader/writer based on the GCI410 smartcard module, to be installed like a 3.5" floppy disk drive. Suitable for computer security, home banking etc..
Features
- ISO7816 smartcard reader/writer (T=0, T=1 and synchronous memory cards with 5Vpp)
- Landing smartcard acceptor, up to 100,000 insertion cycles
- RS232 serial interface
- Smartcard communication programmable from 9600 bauds to 115200 bauds
- Host communication programmable up to 38800 bauds
- Powered from the PC
- PC/SC drivers (Win9x, WinME, WinNT4, Win2000, XP)
SmartKeyboard
Smart card read/write keyboard with a GemPC410 inside.
Key benefits
- 104 and 105 keys for Microsoft Windows 98
- Uses membrane contact switches incorporating rubber-mat technology
- Reliability:
MCBF= 1x109 operations;
MTBF > 80,000 hours
Operating life of individual keys > 20 million operations
Laser engraved keycap symbols are wear resistant and easy to clean
Applications
The keyboard is ideal for smartcard applications such as home banking, smartcard based Internet transactions, authorizing access to PCs, logging on to networks etc..Smartcard Interface
- Integrated GemPC410 reader (GemCore)
- Read/write to ISO7816 1/2/3/4 microprocessor (T=0, T=1) and memory cards
- PC/SC drivers (GemPC410 drivers for Win9x, WinME, WinNT4, Win2000, XP )
GemSelf700
The GemSelf700 is a dual acceptor smartcard reader/writer with built-in keypad, display, real-time clock etc.. This ergonomic smartcard reader is suitable as a POS reader, as a payment terminal, as a debit/credit terminal for customer loyalty points, as an ID terminal or as a reloading terminal for gaming applications. It can be used stand-alone or as a peripheral device, connected to the data processing system. In stand-alone mode must be personalized for the specific application prior to use.
Features 
- Two ISO7816 smartcard acceptors (T=0, T=1, synchronous memory cards)
- Landing smartcard acceptor with up to 100,000 insertion cycles
- 2 RS232 serial ports
- Smartcard communication programmable from 9600 bauds to 115200 bauds
- Host communication programmable up to 38400 bauds
- Keypad (16 keys: 10 numeric keys and 6 programmable function keys)
- LCD display (2x16 characters)
- Real-time clock
- Buzzer
- Up to 512 Kbytes program memory (flash) and 512 Kbytes data memory
- Up to 4 security modules (GemSelf700 MS4)
Options
- Thermal printer (DX58)
- GemCORE500-MS (program and data memory extension board for stand alone operation).
- Development Kit
Complete specifications Gemplus Block Protocol
GSM Products
Product overview
MySIMeditor is a PC based application designed to offer SIM and USIM cards data management functions, it can be used in different environments :
- by GSM or UMTS subscribers : at home or in corporate environment (company's fleet manager)
- by network operators in points of sales or for retailers
Plug your (U)SIM card in the MySIMeditor's smart card reader and go through the MySIMeditor's graphical user interface to access the following functions (list is not exhaustive) :
- Phone book management : create/update/delete contacts in card's phone book. If the card is a USIM (3G) card, MySIMeditor allows you to define several phone numbers for a contact (Home, Office, Mobile...), e-mail addresses, groups
- Card copy : copy data (including phone book, SMS) from old (U)SIM to new (U)SIM when changing card.
- Secret codes management : change, enable/disable, unblock PIN cod
Kit description
MySIMeditor kit contains:- CD-ROM with very simple installation procedure
- Installation guide
- USB smart card reader
- Plug-in adaptor
System requirements
Hardware requirements
- Personal computer with CPU 600 MHz minimum
- 64 MB RAM, hard disk with 10 MB of free space
- a free USB connector (if you have several USB devices, you can use an USB Hub)
- a CD-ROM drive
Software requirements
- Windows XP/2000/NT 4.0/98
- Internet Explorer 5.5 or above
Note that as Windows NT does not support USB, only serial reader can be used with this OS
Product overview
MySIMcopier is a stand-alone tool enabling the end-user to copy phone book and messages from one (U)SIM to another in complete security.
The SIM card reader is available in two versions for two different needs:
- MySIMcopier 3G, the new 3G version, to facilitate migration to 3G.
- MySIMcopier 2G, to smooth SIM renewal towards high-end cards,
- to keep their personal data when changing their (U)SIM,
- to back-up their personal data on a back-up card.
- all (U)SIMs wholly compliant with the GSM & 3G standards
- from any manufacturer, whatever the operator
It is part of a complete logistic solution ensuring high acceptance rate for new (U)SIM when the operator proceeds to a (U)SIM renewal campaign: this solution is the SIMigration Pack.
It is a customizable solution: hardware and software can be customized.
Standards conformity
- CEM & Europ security (CE), CEM AUSTRALIA (C-TICK), CEM USA (FCC), CEM Canada (ICES), BSMI
- GSM11.11 &11.12 compliant
- 3GGPP TS 51.011, 23.003, TS 31.101, TS 31.102, ETSI TS 102.221, ETSI 101.220
- ISO / IEC 7816 compliant
GemCore Chipset
The Ultimate Hardware / Firmware Solution to make a Universal Smart Card interface
GemCore technology is the answer to the increasing demand for smart card readers in applications such as electronic commerce, healthcare, electronic purse, access control, etc. It makes it easy for a designer to integrate a smart card interface in any electronic equipment like PCs, network computers, cell phones, keyboards, set-top boxes, payphones, ATM, vending machines, terminals, etc.
GemCore Architecture
The GemCore concept is the result of years of R&D, based on the expertise of the world's leading provider of plastic and smart card-based solutions. The GemCore technology is made of components, tools and services.
The architecture features the Micro Controller (MC100) which contains the GemCore firmware and manages all the communication between the smart card and the integrating device, and the Interface Chip (IC100 or IC20) that ensures a high reliability for read/write operations.
The latest GemCore "PRO" versions merge the two functions into the same component and reaches the ultimate integration level.
GemCore410-EMV
The OEM Smart Card Reader 
The GemCore410-EMV is a modular, yet very compact coupler. It offers the simplest means of integrating an EMVCo approved smart card reader into different types of electronic equipment.
Built around the GemCore technology, this coupler allows larger systems to easily access all types of smart cards through an on-board or external smart card connector.
A Security Access Module (SAM) can also be connected to the board.
The interface with the host processor is a serial TTL or RS-232 link. The communication protocol is supplied as a C language source code library (GILK). PC/SC drivers are provided for Windows enviroment.
GemCore500-MS4
The Multi-SAM OEM Smart Card Reader
The GemCore 500-MS4 (formerly known as the GCI400-MS) coupler is a modular, multi-SAM, yet very compact OEM Smart Card reader. Built around the GemCore™ Original V1.10 architecture, it is equipped with all the hardware and firmware components required for easy integration into larger systems and equipment.
The GemCore 500-MS4 integrates programmable memory. It can run embedded applications; its electronic system manages the interface with one main Smart Card, four Security Access Modules (SAM) and a real-time clock. Several external peripherals such as a display, a keyboard and a buzzer can readily be connected.
The GemCore 500-MS4 is thus perfectly designed for integration into automated or vending machines. It is especially well designed to meet the requirements of electronic-purse applications.